The Sharebox 3D User Interface consists of:
Dashboard, for monitoring the parameters and the printing process via webcam,
File Manager, for loading Gcode files and launching the print job, Configure for settings
related to notifications, passwords and WiFi
Dashboard
The Dashboard displays:
● Printer status: Online / Offline - Printing / waiting for user
● The printer status file name with the extension .Gcode
● Control commands of the printing process
● Elapsed time
● Percentage advancement
● The video streaming printing process, the webcam image is highlighted in the
● Foreground when it is selected
● Temperature values set and detected
File Manager
Files uploaded by File Manager are sent to the internal memory of the machine.
After the file is loaded via the web interface, a print job can be started from both the
Sharebox 3D and the front display of the client machine.
Managing Gcodes From the G-Codes File Manager
Upload a file remotely
From File Manager it is possible to upload files with a *.Gcode extension to the
26
To Next Page
Loading...