It is possible to set one or more email addresses (separated by a space) to which to send
notifications, which can be selected as desired among the four default proposals.
TEST: only after saving the configuration, it is possible to verify the correct insertion of the
data by sending a test email.
SMTP SERVER:
In this section you can make the classic configuration to send and receive emails.
WIRELESS LAN
To configure the wireless connection, first connect the printer to the network using the
ethernet cable, access Sharebox3D via the IP supplied by the printer ("gear" menu →
"configuration" → "network config.").
Now from the wireless lan menu you can activate or deactivate the WiFi connection,
choose the network to which the printer (SSID) to connect by scanning the available
networks, choose the type of security (WPA - open).
Once the connection has been configured click "SAVE" and the next confirmation.
Now from the printer display select "WiFi Config.": Using the IP address provided by the
printer you can connect to it in WiFi mode.
PASSWORD
Here you can change the password for the login credentials to Sharebox 3D
Pre-set password: “Sharebot” (with capital S).
28
To Next Page
Loading...