4.11.4. After landing
- brakes use as needed
- wing flaps retract
- trim neutral
- flaps 0 or 1
- fuel pump off
4.11.5. Engine shut down
- power cool down the engine at 2 000 rpm (if necessary)
- avionics and other switches off
- ignition off
- master switch off
- fuel tank valve off - closed
- secure the airplane use parking brake, anchor an airplane,
or otherwise secure the airplane
against free movement.
4.11.6. Post-Flight Check
Check the airplane overall condition.
4.12. SHORT FIELD TAKE-OFF AND LANDING
PROCEDURES
Normal procedures can be followed for short take off. Use second
landing flaps setting together with approach speed 90 - 100 km/h.
4.13. BALKED LANDING PROCEDURES
- power max. 5 500 r.p.m
- airspeed 120 km/h
- engine instruments check
- wing flaps take-off (position 1)
- trim trim
- landing gear retract, check 3 red
- wing flaps retract in 150 ft
- trimming trim
- power max. 5 500 rpm
- climb 120 km/h
To Next Page
Loading...
Need help?
General
