QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
• It's best to use 2 people to remove the
AQUaS
television for stability.
• Lift onto installation location as the diagram illustrates.
Ventilation &Cleaning Tips
Keep your
AQUaS
television
in
a well ventilated area and make sure not to place it by a heat source or use
it
near
water. The
AQUaS
television
is
designed for AC use only and should be used with the supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and
~
~..
'. '
.••
".
avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use
---=
,
liquid or aerosol cleaners. '
The screen
is
glass and can be scratched or broken when dropped or impacted. \ \ I I
f/~Cj~
QUICK INSTALLATION TIPS
3 Place the Ferrite core
in
the space indicated
in
the
below figure and bundle the cords properly with
the cable clamp and the cable tie.
MENU
o
POWER
\1
t--ft;10WER
INPUT
o
POWER indicator
B)
The
paWER
indicator on the front
of
the
AQUaS
television lights BLUE.
1m
•
TV
angle cannot be adjusted.
4
How
to turn on the
AQUaS
television for the first
time.
A)
Press POWER on the
AQUaS
television.
Ferrite core
--------
i1-
------~-
""----
11-
t.'h:::r
I"
,
II
~
LC-46SE94U LC-65SE94U
LC-52SE94U
\
CP>"
IAC outlet
~
.
n ,
•.
""
I '
:J.,~
• Place the
TV
close to the AC outlet, and keep the power
plug within reach.
• This product must only be connected to a 120
V,
50
Hz,
grounded (3-prong) outlet.
Connecting
it
to any other kind of outlet will damage the
product and invalidate the warranty. (LC-55SE94U only)
1 Attach your antenna to the back of the
AQUaS
television. (See page 12.)
2 Connect the AC plug for the
AQUaS
television into
the AC outlet.
1m
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE
AC
CORD CONNECTED.
@-
7
To Next Page
Loading...
