114
OPTIONAL EQUIPMENT
500-SHEET PAPER FEED
UNIT (AR-D11)/2x500-SHEET
PAPER FEED UNIT (AR-D12)
These paper feed units provide the convenience of increased paper capacity for the copier and a
greater choice of paper sizes readily available for copying.
The AR-D11 contains one 500-sheet paper tray and the AR-D12 contains two 500-sheet paper trays.
Part names
Specifications
NOTE:
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units and there may be some
deviations from these values in individual units.
●
Two units of AR-D11 cannot be stacked for use with the copier.
AR-D11 AR-D12
Copy paper size B5 to A3 (8-1/2" x 11" to 11" x 17")
Paper weight 56 to 80 g/m
2
(15 lbs. to 21 lbs.)
Paper capacity One paper tray with capacity for 500
sheets of 80 g/m
2
(21 lb.) paper
Two paper trays with capacity for 500
sheets of 80 g/m
2
(21 lb.) paper each
Weight Approx. 6.1 kg (13.5 lbs.) Approx. 11.8 kg (26.1 lbs.)
Dimensions 596 mm (W) x 471 mm (D) x 97 mm (H)
(23-15/32" (W) x 18-35/64" (D) x
3-53/64" (H))
596 mm (W) x 471 mm (D) x 194 mm
(H) (23-15/32" (W) x 18-35/64" (D) x
7-41/64" (H))
Power supply Drawn from the copier
AR-D11
Side cover
Tray
Side covers
Trays
AR-D12
00EX.book114ページ２００１年５月２５日 金曜日 午前１０時４９分
To Next Page
Loading...
Need help?
General
