61
3
SPECIAL FUNCTIONS
JOB MEMORY
Nine frequently used job programs can be stored in each of nine storage registers. This is convenient
for quick job recall without losing time manually reprogramming each aspect of a job.
●
The following functions cannot be stored in the job memory: copy quantity, original size, document
station (platen glass or document feeder tray), paper size, interrupt, extra image adjustment
●
If any function which has been stored in a job program is modified by a key operator program, the key
operator settings will supercede the previous setting.
●
The job memory feature cannot be used in the interrupt copy mode.
★KEY OPERATOR Job memory replacement/deletion can be prohibited. See page 134.
Storing a job program
1
Make all copier selections to be stored.
2
Press the PROGRAM key.
●
The JOB PROGRAMS screen will appear.
3
Use the and keys to select "STORE" and press the OK key.
●
The STORE JOB PROGRAM screen will appear.
●
To cancel the job memory mode, press the BACK key or the CLEAR ALL (CA) key.
JOB PROGRAMS
RECALL
STORE
DELETE
STORE JOB PROGRAM
123
456
789
[10-key]:SELECT
00EX.book61ページ２００１年５月２５日 金曜日 午前１０時４９分
To Next Page
Loading...
Need help?
General
