500-SHEET PAPER FEED UNIT (AR-D11)/2x500-SHEET PAPER FEED UNIT (AR-D12)
115
6
OPTIONAL EQUIPMENT
Loading copy paper
The method of loading copy paper for these paper feed units is the same as for the paper trays in the
copier. See page 78.
Changing the copy paper size in the tray
The method of changing the copy paper size is the same as for the paper trays in the copier. See page
80.
Misfeed removal
The copier will stop when a misfeed occurs. The message "Clear paper path." will appear along with a
display of paper misfeed locations.
1
Open the side cover of the paper tray which was in use and remove
the misfed paper.
●
Be sure to perform this step before pulling out the paper trays. If not, the paper may be
torn as the trays are opened.
00EX.book115ページ２００１年５月２５日 金曜日 午前１０時４９分
To Next Page
Loading...
