Sharp AR-235

153
KEY OPERATOR CODE
NUMBER: FACTORY SETTING
The following is the factory setting of the Key Operator Code
Number, which must be used to access the Key Operator
Program.
Factory setting = 00000
This number must be entered when accessing the Key
Operator Program for the first time. (See page 118)
NOTE:
The Key Operator Code Number is an important security
number allowing the Key Operator to configure the copier’s
functions and auditor’s settings.
You should register your own code number
- different from
the factory setting above
- immediately after your copier is
installed.
★ KEY OPERATOR
Detach this page and store it in a safe place.
✂
00EX.book153ページ２００１年５月２５日 金曜日 午前１０時４９分