Sharp AR-235

MISFEED REMOVAL
68
COPIER TROUBLE?
Misfeed in the copier
Check the misfeed location. Remove the misfed paper following the
instructions for each location in the illustration below.
A. Misfeed in the paper feed area
1
Open the bypass tray and the side cover.
2
Gently open the front cover.
If the misfed paper is seen from this
side, proceed to “C. Misfeed in the
transport area”.
If paper is misfed here, proceed to
“A. Misfeed in the paper feed area”.
If paper is misfed here,
proceed to “B. Misfeed
in the fusing area”.
00EX.book68ページ２００１年５月２５日 金曜日 午前１０時４９分