Sharp FO-2080 User Manual

LOADING PAPER
22
Loading paper in the bypass tray
1
Open the bypass tray and extend the tray.
2
Set the bypass tray paper guides to the paper width. Insert the
paper (print face down) all the way into the bypass tray.
3
Press the [TRAY SELECT] key ( ) to select the bypass tray.
• Paper must be fed narrow side first into the feed slot.
• Special papers such as transparency film, labels, and envelopes
must be fed one sheet at a time through the bypass tray.
• When copying onto transparency film, remove each copy promptly.
Do not let copies stack up.
To close the bypass tray, perform step and then step in the
illustration and push the round projections at the right of the tray
until they click.
Note for loading thick paper
Confirm that user program 29 is set to "2 (HEAVY PAPER)" when using thick
paper. (See page 65.)
Note
Note
1
1
1
2
1
2
Print face
!FO-2080.book 22 ページ ２００９年５月１５日 金曜日 午前１０時４２分

Sharp FO-2080 Specifications

General

Brand	Sharp
Model	FO-2080
Category	All in One Printer
Language	English