82
SPECIAL FUNCTIONS
To store junk fax numbers, use the following procedure:
1
Press the [MENU] key.
2
Press the [ ] key ( ) or [ ] key ( )
until "5:ANTI JUNK FAX" appears, and
then press the [ENTER] key.
3
Press the [ ] key ( ) or [ ] key ( )
to select "2:JUNK FAX #" and press
the [ENTER] key.
4
Press the [ ] key ( ) or [ ] key ( )
to select "1:SET" and press the
[ENTER] key.
5
Enter a two-digit number from 01 to 10
that will identify the anti junk number
and press the [ENTER] key.
6
Enter the fax number with the numeric
keys and press the [ENTER] key.
7
Press the [MENU] key.
If you wish to store
another fax number,
return to step 5.
Press the [MENU] key to
exit.
"5:ANTI JUNK FAX"
Selection
"2:JUNK FAX #"
Selection
"1:SET"
Selection
If you enter a two-digit number that already
has a fax number stored, "#xx
STORED:CHANGE?" will appear. To
change the fax number that has been stored
under that 2-digit number, press the [ ]
key ( ) or [ ] key ( ) to select "YES",
press the [ENTER] key, and enter the new
fax number.
Note
!AR-FX13_sec.book 82 ページ ２００９年５月１１日 月曜日 午後２時２４分
To Next Page
Loading...
Need help?
General
