Using external equipment
r.................
Connecting HDiVll equipment
You can use the INPUT4 terminal when connecting HDMI equipment,
HDMI cable
HDMI equipment
When using an HDMI-DVI conversion cable, use INPUT4 and AUDIO terminal
Displaying an image from HDMI
equipment
To watch an HDMI equipment image, select
"INPUT4" from "SOURCE SELECTION"
menu using INPUT on the remote control
unit or on the TV (See page 14,)
SOURC_ SEL_CTtON
1:INPUT1
2t INPUT2
3:INPUT3
E4_5[tlE_I_,_
5; INPUT5
[O ,5]:SELECT
,, Refer to your external equipment operation manual for the
signal type
Selecting HDMi audio input source
Press TV MENU and the MENU screen
displays
Press </b- to select (_ (AUDIO),.
Press A/_ to select "HDMI"
Press </_,- to select "HDMI" or "DVP
O_GFTALO_TPL_T PC_
_T:SELECT <_:_OJUST
HDMh When you connect the HDM] device
to the TV, select this setting..
DVh When you connect the DVI device
to the TV with analog audio cords,
select this setting
Press EXIT to return to the normai screen
• Refer to your external equipment operation manual [or the
signal type
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may net come in clearly
(_-16
To Next Page
Loading...
Need help?
General
