Sharp LC-19AD22U User Manual

Basic adjustment settings
Sound adjustments : ;
You can adjust the sound quality to your preference
with the following settings,
,i,,, ,,,,,r,,,r,,,,,
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the COAXIAL DIGITAL AUDIO
OUTPUT terminal on the TV/DVD. Please select an
audio output format compatible with the audio format
of the program you are watching and the equipment
connected.
Press TV MENU and the MENU screen
displays.
Press </1_to select 0 _'(AUDIO).
wrs SlER_O
TREBL_ 25
_U_OU_D OFF
T
_T:SELECT _:kDJU_
Press _,/'_' to select a specific adjustment
item (BASS, TREBLE, BALANCE)
Press TV MENU and the MENU screen
displays
Press 4/t_ to select (_ (AUDIO)
Press A/T to select "DIGITAL OUTPUT".
Press 4/_ to select "PCM" or "DOLBY
DIGITAL"
AUDI_
A
AgO_OLk_GUAGEk
_Y:_ELECr <_:AD_ST
Press </_ to adjust the item to the desired
level
BASS For weaker bass For stronger bass
TREBLE For weaker treble For stronger treble i
BALANCE Decrease audio Decrease audio
from the right from the {eft
speaker speaker
Press EXIT to return to the normal screen
PDM
DOLBY DIGITAL
The coaxial digital audio output
terminat outputs audio signal in PCM
form Ifyour digital audio system
does net support Do[by Digital, select
'PCM"
The coaxia_ digital audio output
terminal outputs audio signal in Dolby
Digital form It reproduces sound
'rom surround program of digital
Press EXIT to return to the normal screen.
. For resetting al{ Audio adjustment items to the factory
preset values, press _!T to select "RESET", and then
press ._/_.
factory settings:
BASS ............. center (25)
TREBLE ........... center (25)
BALANCE ........... center (0)
,. Digital audio output is active only when receiving digital
broadcasting, not when receiving analog broadcasting

Sharp LC-19AD22U Specifications

General

Brand	Sharp
Model	LC-19AD22U
Category	TV DVD Combo
Language	English