Function setup
, t ,u ,,,,,.,,,. ,,,,,,,.,,u,,,, ,,v,,,,,,vt
Setting the picture mode _
There are two types of source content in pictures
recorded in DVD video discs: _m content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames
per second) Make this selection according to the type
of content being viewed.
Press SETUP and the SETUP screen
displays
Press A/v to select [_] (PICTURE), then
press ._/_,-or ENTER,
Press t./v to setect"Picture Mode", then
press _.-or ENTER
Press _/v to setect your desired picture
mode, then press ENTER
Auto
Film
Video
Select this positron normaUy The DVD
player automaticatty detects source
content, film or video, of playback source.
Suitable for ptayback of ft_mcontent
pictures.
Suitable forplayback of video content
pictures,
Press SETUP to return to the normal screen.
Setting the JPEG interval
You can continuously playback atl JPEG files
automatically
Press SETUP and the SETUP screen
displays
Night Mode
Night Mode enables you to control the dynamic range
so as to achieve a suitable sound for your equipment
Press SETUP and the SETUP screen
displays,
Press A/_r to select (T_t (AUDIO), then press
4/p or ENTER
Press _/v to select "Night Mode", then
press v or ENTER
Press ,e,/T to select "On" or "Off", then press
ENTER,
O_glt_t out _Pcl'_
Off It p_ays back at the recording level on
the disc.
On Loud sound such as explosion or sim+lar
is toned down slighliy when prayed
back This makes it suitable for when it
is connected to a stereo.
Press ;ETUP to return to the normal screen
• This function works only during playback of Dolby Digitai
recorded discs
• The tevel of Dynamic Range Reduction may differ
depending on DVD video disc
Digital Out
' E
Press A/v' to select l_ (PICTUR), then
press 4/v or ENTER
Press ,_/v to select "JPEG Interval",then
press 1,-or ENTER
i Press ,_/v to select your desired time, then
press ENTER
Off ......................P.!a.ysback one file at a time,
5 Seconds Displays imagesin the form ofa slide show
Every 5 seconds the imagechanges,
i0 Seconds Disptays imagesin theform el a slide show
Every 10 seconds the image changes,
15 Seconds Displays images in the form of a slide
show Every 15 seconds the image
changes.
Press SETUP to return to the normal screen
• You cannot display DVD SETUP screen when disc is
playback
(_- 48
You can select the digital output sound format
corresponding to your system connection
Press SETUP and the SETUP screen
displays
Press ,_/v to select _ (AUDIO), then press
_/_. or ENTER
Press A/_' to select "Digital Out", then press
_. or ENTER
Press _./v to select desired mode, then
press ENTER.
Off
PCM
There is no sound output from DIGITAL
AUDIO OUT jack.
Change Dotby Digital to PCM for the
output
Select when connected to a 2 channel
digital stereo amplifie_.
Bitstream Disc audio bitstream data witl be output,
+ Even if you select "Bitstream ", MPEG audio wil_be output
in PCM format
To Next Page
Loading...
Need help?
General
