MX-5111N Necessary works before moving the machine 36 – 1
MX-5111N
Service Manual
[36] Necessary works before moving the machine
1) If the following options are installed, remove all of them from
the machine.
• Large capacity tray
• Finisher
• Paper pass unit
• Saddle finisher
2) Remove the following consumable parts from the machine.
• Paper
• Toner cartridges
• Development cartridge
3) Lock the following sections.
• Scanner (Optical section)
• Paper cassette lift plate
NOTE: Since the hard disk drive is built in the machine, use care
not to exert vibrations or shocks to the machine when in
transit.
To Next Page
Loading...
