MX-5111N MX-PNX6A/B/C/D (PUNCH MODULE) 16 – 1
MX-5111N
Service Manual
[16] MX-PNX6A/B/C/D (PUNCH MODULE)
1. Unpacking
A. Pulling out of the punch unit
B. Removal of the protection material
1) Remove the fixing tape and protection material.
2) Open the front cover, and open the top cover.
3) Remove the screws, and remove the fixing material. (2 posi-
tions)
4) Close the top cover, and close the front cover.
To Next Page
Loading...
