Sharp MX-5112N - Page 43

MX-5111N MX-LC11 (LARGE CAPACITY TRAY) 6 – 2
B. Connection of the main unit and the large
capacity tray unit
1) Install the mounting plate upper (Packed items) to the right
side of the main unit with the fixing screw A (Packed items).
* When installing, put the rubber section of the mounting plate
upper on the lower side.
2) Remove the right door cover from the machine.
3) Disengage the pawl, and remove the right adjuster.
4) Remove the screw cap, and remove the screw.
5) Remove the cover.
6) Temporarily fix the fixing screw B (Packed items) midway.
7) Insert the temporarily fixed screw B into the key hole in the
connection unit (Packed items), and temporarily fix the con-
nection unit.
8) Fix the other fixing screw B (Packed items), and tighten the
temporarily fixed screw B securely.
1
2
3
3
1 1
2
1
2
1
2
1
2