Sharp MX-B350W User Manual

5-12
SCANNER►SCANNER SEQUENCE
SELECTING THE RESOLUTION
The scanning resolution can be selected. After selecting scan mode and placing the original (steps 1 to 3 on page 5-5),
perform the procedure below.
The factory default setting for the resolution is "200dpi".
If you need to change the resolution, follow these steps.
1
Select "Resolution" with the [ ] or [ ] key, and then select the resolution.
2
Press the [OK] key.
Resolution
• The default resolution setting is 200 dpi. For typical text documents, a resolution of 200 dpi or 300 dpi produces
sufficiently legible image data. (A resolution of 200 dpi corresponds to the generally used "Fine" in fax mode. For this
reason, the 600 dpi setting should only be used in cases where high-clarity image reproduction is required, such as an
original that includes photographs or illustrations.
• The default setting can be changed in the system settings. ►page 7-23

Sharp MX-B350W Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	35 cpm
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Original Size	Max. A4
Operating System Compatibility	Windows, Mac OS, Linux
Paper Capacity	350 sheets
Connectivity	USB, Ethernet, Wi-Fi
Network Connectivity	Wireless LAN