2-13
COPIER►BASIC PROCEDURE FOR MAKING COPIES
MAKING COPIES USING THE BYPASS TRAY
In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special
media.
SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON
BYPASS TRAY
For detailed information on paper that can be loaded into the bypass tray, see "APPLICABLE PAPER TYPES (page 1-17)".
For precautions on loading paper into the bypass tray, see "LOADING PAPER INTO THE BYPASS TRAY (page 1-24)
".
1
Select "Paper" in the right menu of the base screen of copy mode and press
the [OK] key.
2
Select "Paper" with the [ ][ ] keys, and press the [OK]
key.
3
Press the [SPECIAL FUNCTION] key, select "Paper Type
Set", and select the type of paper to be used in the
bypass tray.
Select the paper type with the [ ][ ] keys. When finished, press the [OK] key.
To use an envelope, go to step 7.
4
Press the [SPECIAL FUNCTION] key, select "Paper Size
Set", and select the paper size used in the bypass tray.
Select the paper size with the [ ][ ] keys. If the paper size is a standard size,
select Paper Size, press the [OK] key, and specify the paper size.
The specified paper size appears in the paper size field of the base screen.
To use a special paper size, go to step 5.
5
● Special paper size
Select "mm" or "inch" and press the [OK] key.
Paper Select
8½x11
8½x11
8½x11
Set Completed
Paper Type Set
Plain 1
Plain 2
Heavy Paper 1
Set Completed
Paper Size Set
8½x11
5½x8½
inch
7¼x10½
Paper Size Set
A4
5½x8½
inch
7¼x10½
To Next Page
Loading...
Need help?
General
