Loading paper and specialty media
Setting the paper size and type
1 From the home screen, navigate to:
Settings > Paper > Tray Configuration > Paper Size/Type > select a paper source
2 Set the paper size and type.
Configuring Universal paper settings
1 From the home screen, touch Settings > Paper > Media
Configuration
> Universal Setup.
2 Configure the settings.
Loading trays
1 Remove the tray.
Note: To avoid paper jams, do not remove the tray while the printer is busy.
2 Adjust the guides to match the size of the paper that you are loading.
Set up, install, and configure 27
To Next Page
Loading...
