Sharp MX-B427W

Fax Receive Settings
Menu item Description
Rings to Answer
1–25 (3*)
Set the number of rings for incoming fax.
Auto Reduction
On*
O
Scale incoming fax to fit on the page.
Paper Source
Tray [X]
MP Feeder
Auto*
Set the paper source for printing incoming fax.
Sides
On
O*
Print on both sides of the paper.
Separator Sheets
None*
Before Job
After Job
Specify whether to insert blank separator sheets when printing.
Separator Sheet Source
Tray [X] (1*)
MP Feeder
Specify the paper source for the separator sheet.
Fax Footer
On
O*
Print the transmission information at the bottom of each page from a received
fax.
Fax Footer Time Stamp
Receive*
Print
Print the time stamp at the bottom of each page from a received fax.
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item Description
Enable Fax Receive
On*
O
Set the printer to receive fax.
Enable Color Fax Receive
On*
O
Set the printer to receive fax in color.
Enable Caller ID
On
O*
Show the number that is sending the incoming fax.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 79