Sharp MX-FN27 - Page 21

MX-FN27, MX-PN14 DISASSEMBLY AND ASSEMBLY 5 – 3
(1) Upper Feed Guide Unit
a. Preparation
1) Remove the machine from the host machine.
2) Remove the Front Cover Unit.
3) Remove the Rear Cover.
b. Procedure
NOTE: Be sure not to lost the Gear [1] and the Pin [2] when disas-
sembling/assembling.
1) Remove the Cable Guide [1].
– 1 Connector [2]
– 1 Screw [3]
– 1 Claw [4]
2) Remove the 1 Clip [1] and 1 Bushing [2].
3) Remove the Upper Feed Guide Unit [1].
– 2 Screws [2]
(2) Processing Tray Unit
a. Preparation
1) Remove the machine from the host machine.
2) Remove the Front Cover Unit.
3) Remove the Rear Cover.
4) Remove the Delivery Tray.
5) Remove the Upper Feed Guide Unit.
6) Remove the Staple-free Staple Unit.
7) Remove the Tray Guide Cover.
b. Procedure
1) Remove the Front Tray Lack [1] / Rear Tray Lack [2].
No. Parts Name
[1] Stapler Unit
[2] Staple-free Staple Unit
[1]
[2]
[1]
[2]
1x
[2]
[3]
1x
[1]
[4]
[1]
[2]
2x
[2]
[1]
[2]
[1]