Sharp UX-1300 - Page 47

SENDING DOCUMENTS
4 When you hear the reception tone, press
the START key. Replace the handset if
you used it.
e When transmission is completed, the
fax will beep.
Direct Keypad Dialing
If you do not need to talk with the other party before sending the fax, you can just
dial; it isn’t necessary to pick up the handset or press the SPEAKER key.
@ Direct Keypad Dialing is a form of automatic dialing, so if you need to insert a
pause between any digits of the number, press the REDIAL key. (For more
information on pauses, see "Storing Numbers for Automatic Dialing" in Chapter
2.)
1 Enter the number of the receiving ma-
chine by pressing the number keys.
2 Check the display. If the number of the
receiving machine shown is correct,
press the START key.
e If itis not correct, press the STOP key
to backspace and clear one digit at a
time, and then re-enter the correct
digit(s).
FAX OPERATIONS 3-7