Sharp UX-1300

REMOTE OPERATIONS
Turning the Transfer function on or off
(The
Transfer
function
is
described
in
the
following
section,
"Other
functions".)
To turn Transfer on: Press "9", "1", and
"#", followed by the number of the box
("0" for the General Box) and "#".
To turn Transfer off: Press "9", "2", and
(Example) "#" on the telephone.
Changing the transfer telephone number
1
Press "9", "0", and "#" on the telephone.
2
After
you
hear
a
short
beep,
enter
the
new telephone
number.
When finished,
press
"#".
e To insert a pause between any two
digits of the number, press "9".
(Example)
Recording a new transfer message
1 Press "9", "3", and "#" on the telephone.
2 When you hear a short beep, speak into
the telephone to record the new mes-
sage.
e The time for the transfer message is
fixed at 15 seconds. After 15 seconds
(or earlier if the machine detects
silence after you finish speaking), you
will hear a beep, and the new
message will be played back
automatically.
USING
THE
ANSWERING
MACHINE
4-11