Sharp UX-1300 User Manual

REMOTE OPERATIONS
@]inl-lame-liste)icme) el-e- 140) ars
After listening to your messages, you can do any of the operations described below
by pressing the appropriate keys on the telephone.
Note: The following commands cannot be entered while messages are being
played back. If you do not want to wait until playback ends to enter a com-
mand, first stop playback by pressing "0" and "#", and then enter the com-
mand.
Changing the fax reception mode
Select a new reception mode by press-
ing the keys as follows:
e T.A.D. mode: "8", "1", and "#".
e FAX mode: "8", "2", and "#".
e TEL mode: "8", "3", and "#".
(Example)
Recording a new outgoing message
Note: A new outgoing message can only be recorded for the box you selected at
the beginning of the remote operation procedure.
1 —_ Press "4" and "%" on the telephone.
2 When you hear a short beep, speak into
the telephone to record the new mes-
sage.
e The message (including the general
outgoing message) can be up to 15
seconds long. After 15 seconds (or
earlier if the machine detects silence
after you finish speaking), you will
hear a beep, and the new message
will be played back.
4-10 USING THE ANSWERING MACHINE

Sharp UX-1300 Specifications

General

Brand	Sharp
Model	UX-1300
Category	Fax Machine
Language	English