Sharp UX-1300 User Manual

INSTALLATION
After unpacking your fax, make sure you have all the items shown below. If any are
missing, contact your dealer or retailer.
Received
document —____
tray
_—— Rapid key labels
® :
\, —— Operation
ANS manual
84
Ne
sre Handset cord
ai
Paper tray cover
ee
‘Telephone
line cord
_—— Sample sharp
printing paper
Handset _———_—_—— GF” (with the
UX-1400 only)
Co &p
3 gears and
1flange €o ©
ae
Imaging film
PC interface kit
(with the UX-1400
only)
—(two cables, PC
interface box,
floppy disks, fax
software manual,
connection
instructions)
Points to keep in mind when setting up
# The fax must be installed on a level surface.
@ Keep the fax away from air conditioners, heaters, direct sunlight, and dust.
@ Ifthe fax is moved from a cold to a warm place, it is possible that condensation
may form on the reading glass, preventing proper scanning of documents for
transmission. To remove the condensation, tum on the power and wait
approximately two hours before using the fax.
@ If your area experiences a high incidence of lightning or power surges, we
recommend that you install surge protectors for the power and telephone lines.
Surge protectors can be purchased at most telephone specialty stores.
INSTALLATION 1-1

Sharp UX-1300 Specifications

General

Brand	Sharp
Model	UX-1300
Category	Fax Machine
Language	English