Sharp UX-1300 User Manual

If you frequently perform the same operation involving the same party, you can
program
all
the
steps
of
the
operation
into
one
Program
Key.
This
allows
you
to
perform the operation by simply pressing that key.
Rapid
Keys
16/P1
and
17/P2
can
be
used
as
Program
Keys.
However,
a
key
cannot
be
used
if
it
is
already
being
used
for
Rapid
Key
Dialing.
Only
Speed
Dial
numbers
can
be
used
to
enter
fax
numbers
of
receiving
machines
in
the
Program
Keys.
Full
numbers
cannot
be
entered.
@ Ifthe program is for a polling operation, a timer setting can be included to have
the operation performed automatically at a selected time.
Toclear a mistake, press the STOP key.
Initial procedure
To program an operation, first perform the following procedure. After you have
completed it, go to the procedure for the specific operation you want to program.
1 FUNCTION Press the keys shown at left. "PRG. EN-
TRY MODE" will appear in the display.
2 _ Press "1" to select SET.
Press a Program Key ("16/P1" or
3
17/P2
sedi
or
"17/P2")
to
select
it.
Enter a name for the program (max. of
20 characters). (See "Entering Letters
for Names" in Chapter 2).
Skip this step if you don’t want to enter a
name.
SPECIAL FUNCTIONS 7-15

Sharp UX-1300 Specifications

General

Brand	Sharp
Model	UX-1300
Category	Fax Machine
Language	English