Sharp UX-1300

ENTERING AND USING PROGRAMS
Press the START key.
6 Press the "#" key or the "3€" until the de-
sired operation appears in the display.
The operations will appear in the follow-
ing order:
e Transmission ("SEND")
e Polling
e Broadcasting
or
7 Press the START key and then con-
tinue with the specific procedure for your
operation (see the following pages).
Transmission
(Continued from "Initial procedure".)
8 Press "1" if you want the document to be
scanned into memory and then transmit-
ted, or "2" if you want the document to
be transmitted directly from the feeder.
(Note: If you select "2", you can include
a timer setting in the program.)
or
e If you pressed "1", go to Step 12. If
you pressed "2" and don’t want to
make a timer setting, go to Step 11.
9 Enter the time at which you want the op-
eration to take place (2 digits for the
hour and 2 digits for the minute).
(Example: 9:25)
10 Press "%" to select A.M., or "#" to select
P.M.
11 Press the START key.
7-16 SPECIAL FUNCTIONS