Sharp UX-1300

ENTERING AND USING PROGRAMS
12 Enter the Speed Dial number of the re-
ceiving fax machine.
(Example)
13 Press the START key.
14 RESOLUTION If desired, set the resolution and/or con-
trast by pressing the RESOLUTION key
(otherwise, skip this step).
15 Press the START key and then the
STOP key.
(Continued from "Initial procedure".)
8 Enter the time at which you want the op-
eration to take place (2 digits for the
hour and 2 digits for the minute).
(Example:
9:25)
If
you
don’t
want
to
make
a
timer
setting,
go
to
Step
10.
9 Press "%" to select A.M., or "#" to select
P.M.
10 Press the START key.
11 Enter the Speed Dial number of the re-
(Example) ceiving fax machine.
12 Press the START key and then the
STOP key.
SPECIAL FUNCTIONS 7-17