Sharp UX-1300

ENTERING AND USING PROGRAMS
|=] ge}: Te lerst-y uae)
(Continued from "Initial procedure".)
8 Enter the Speed Dial numbers of the re-
; ceiving machines.
(Example)
9 Press the START key.
1 0 RESOLUTION If desired, set the resolution and/or con-
trast by pressing the RESOLUTION key
(otherwise, skip this step).
11 Press the START key and then the
STOP key.
Clearing a Program Key
To clear a Program key, follow these steps:
1 FUNCTION . = Press the keys shown at left. "PRG. EN-
> TRY MODE’ will appear in the display.
Press "2" to select CLEAR.
3 Press the Program Key you want to
(Example) clear.
4
STOP
Press
the
START
key
and
then
the
STOP key.
7-18 SPECIAL FUNCTIONS