9 Wire treatment
a. Perform wire treatment carefully and deliberately.
b. For wire treatment procedures which are not described in this
section, refer to the section for that portion of the unit.
Parts list (Fig. 9)
No. Part name Q’ty
1 Band 2
2 Core 3
THE HEAD CABLE WILL BE PASSED
TO THE CORE AT 3 TIMES.
DON'T OVER THIS
LINE BY CABLE.
(KEEP TO ARROW SIDE)
DON'T ON THIS
CORE TO PWB
THE DRIVE UNIT CABLES WILL
BE PASSED TO THE CORE AT 2 TIMES.
IT WILL BE HOOKED THE CABLES BETWEEN
THE HOOKING RIBS.
THE SCANNER CABLES WILL BE
PASSED TO THE CORE 2 TIMES.
POSITION OF
CORE
FIX THE CORE
LIKE A PICTURE
1
2
1
1
1
1
2
2
2
2
2
IT WILL BE PASSED THE
CABLE BEHIND THE DRIVE
UNIT AS ARROW A DIRECTION.
80 mm
10
A
rib
2
1
2
2
Fig. 9
UX-177H
3 – 14
To Next Page
Loading...
