Why does the printing paper come out blank on my Sharp Fax Machine when receiving a document?
If the printing paper comes out blank when you try to receive a document on your Sharp Fax Machine, ensure that the document is loaded properly in the feeder of the transmitting machine. Make a copy or print a report to confirm the printing ability of your machine.
How to fix a 'LINE ERROR' on my Sharp UX-355L Fax Machine?
If the Sharp Fax Machine displays 'LINE ERROR', retry the transaction. If it persists: * Ensure the cord from the TEL. LINE jack to the wall jack is no longer than six feet. * Ensure no modem devices share the same telephone line. * Confirm the other party's fax machine is functioning correctly. * Check your telephone line for noise. * Try a different telephone line. If the problem continues, the fax machine may need service.
Why is a distorted image received from my Sharp Fax Machine?
If a distorted image is received from your Sharp Fax Machine, try sending the document again. Noise on the telephone line may cause distortion. Make a copy of the document on your fax machine. If the copy is also distorted, your fax machine may need service.
Why is nothing printing at the receiving end from my Sharp Fax Machine?
If nothing is printed at the receiving end from your Sharp Fax Machine, make sure that the document for transmission is placed face down in the feeder.
Why doesn't my answering machine work properly with my Sharp UX-355L Fax Machine?
If the answering machine connection on your Sharp Fax Machine does not operate properly: * Ensure your fax machine's reception mode is set to A.M. * Ensure your fax machine's TEL. LINE jack is connected to the wall jack and the TEL. SET jack is connected to your answering machine's telephone line jack. * Ensure your answering machine's outgoing message is under 10 seconds. * Ensure that the Quiet Detect Time setting is set to three or four seconds. * Ensure that the Distinctive Ring function is set to OFF SETTING.
What to do if my Sharp UX-355L doesn't respond to key presses?
If the Sharp Fax Machine doesn't respond when you press any keys, and no beep sound is made, unplug the power cord and plug it in again after a few seconds.
How to improve general print quality on my Sharp UX-355L Fax Machine?
If you experience poor general print quality with your Sharp Fax Machine, it is important to select a paper that is appropriate for the thermal transfer printer in your fax. Using laser quality paper that has a very smooth finish is recommended. Copier paper will work, but it sometimes tends to yield a lighter print quality.
What to do if my Sharp Fax Machine has power but won't transmit?
If your Sharp Fax Machine's power is on, but no transmission takes place, ensure the receiving machine has paper and the telephone line cord is plugged into the TEL. LINE jack, not the TEL. SET jack. If the receiving machine is in manual mode without an attendant, reception won't be possible. Check the display for error messages, and check for a dial tone.
Why does nothing appear on the display of my Sharp UX-355L Fax Machine?
If your Sharp Fax Machine shows nothing in the display, ensure the power cord is properly plugged into a power outlet. Also, connect another electrical appliance to the outlet to see if it has power.
Why is dialing not possible on my Sharp Fax Machine?
If your Sharp Fax Machine isn't dialing, ensure the power cord is properly plugged into a power outlet and the telephone line is correctly connected to both the TEL. LINE jack and the wall jack. Also, verify that the fax machine is set to the correct dialing mode for your telephone line.
Lists items included with the fax machine for setup.
Details how to connect the fax machine's components and power.
Guide on how to install the imaging film roll into the fax machine.
Instructions for loading paper into the fax machine's paper tray.
How to input personal and fax number details for the machine.
Procedure to set the current date and time on the fax machine.
Explains and configures modes for receiving calls and faxes.
Step-by-step guide on placing documents into the fax machine's feeder.
Methods for sending faxes using speed dial or rapid key functions.
A categorized list of issues and their corresponding solutions.
Step-by-step instructions to remove jammed paper from the fax.
General| Paper Capacity | 50 sheets |
|---|---|
| Dimensions | 13.4" x 9.1" x 5.9" |
| Weight | 6.6 lbs |
| Automatic Document Feeder Capacity | 10 sheets |
| Print Technology | Thermal Transfer |
| Display | LCD |
| Type | Plain Paper Fax |
| Memory | 512 KB |
| Compression | MH |
To Next Page
