Polling (Requesting a Fax Transmission)
83
7. Special
Functions
Being polled (polling standby)
To let another fax machine poll your fax, press the
RESOLUTION/
RECEPTION MODE
key to set the reception mode to FAX or TEL/
FAX and load the document(s).
Transmission will take place when the other fax machine calls your
machine and activates polling. Automatic reception is possible while
your fax is on polling standby.
Polling security
Polling Security allows you to prevent unauthorized polling of your
machine. When this function is turned on, polling will only take place
when the fax number of the polling fax machine has been entered in
your machine's list of permitted fax numbers (called "passcode
numbers"). The number of the polling fax must also be correctly
programmed into itself for identification.
To use Polling Security, follow the steps below to turn the function on,
and then enter permitted numbers as shown on the following page.
1
Press these keys:
The display will show:
SECURITY SELECT
FUNCTION
3
2
Press
1
to turn polling security on, or
2
to turn it off.
1
2
or
YES NO
3
Press the
START
key and then the
STOP
key.
To Next Page
Loading...
Need help?
General
