Sending a Fax by Automatic Dialling
46
4
Press the
START
key.
5
Return to Step 3 to clear another
number, or press the
STOP
key to
return to the date and time display.
Making changes
To make changes in a number previously stored, repeat the
programming procedure. Select the Rapid Key or Speed Dial number
for which you want to make changes in Step 3, and then change the
number and/or name when they appear in the display in Steps 4 and 6.
Step 3 or
START
STOP
Note:
The fax machine uses a lithium battery to keep automatic dialling
numbers and other programmed data in memory when the power is
turned off. Battery power is consumed primarily when the power is off.
With the power kept continuously off, the life of the battery is about 5
years. If the battery dies, have your dealer or retailer replace it. Do not try
to replace it yourself.
2
Press
2
to select CLEAR.
3
Enter the Speed Dial number that you
want to clear by pressing the number
keys.
2
0
1
(Example)
all-ux40.book Page 46 Thursday, November 18, 1999 2:35 PM
To Next Page
Loading...
Need help?
General
