Sending a Fax by Automatic Dialling
53
2. Sending
Documents
Explanation of headings
SENDER/
RECEIVER
The fax number of the other machine involved in the
transaction. If this machine does not have an ID function,
the communication mode will appear (for example,
"G3").
PAGES
Number of pages transmitted or received.
NOTE OK
- Transmission/reception was normal.
P.FA I L
- A power failure occurred. If you have power
and the problem persists, try a different outlet. If
necessary, have an electrician check your power lines.
JAM
- A problem with the paper or original document
occurred. Make sure the paper or document is loaded
properly. Make sure the operation panel is shut securely.
NO PAPER
- You ran out of paper during reception.
COM.E-0
to
COM.E-7
- A telephone line error
prevented the transaction. See
Line Error
in Chapter 10.
CANCEL
- Transmission was cancelled because the
STOP
key was pressed, no document was in the feeder,
or the other machine requested transmission using a
function which your fax does not have. If you were
attempting to fax, make sure a document is in the feeder.
If you were receiving, contact the faxing party to see how
they are trying to send to you.
all-ux40.book Page 53 Thursday, November 18, 1999 2:35 PM
To Next Page
Loading...
Need help?
General
