Sharp UX-41

Setting the Date and Time
19
1. Installation
4 Enter a two-digit number for the day (“01” to “31”).
Example: the 5
th
• To correct a mistake, press to move the cursor back to the mistake
and then enter the correct number.
5 Enter a two-digit number for the month (“01” for January, “02” for
February, “12” for December, etc.).
Example: January
6 Enter the year (four digits).
Example: 2002
7 Enter a two-digit number for the hour (“00” to “23”) and a two-digit
number for the minute (“00” to “59”).
Example: 9:25
8 Press to start the clock.
9 Press to return to the date and time display.
0 5
SPEED
DIAL
0 1
2
0 0
2
0 9
2
5
START
STOP
The currently set time
appears (example):
TIME 12:19
05-JAN 09:25
STORE JUNK #
DATE 05-01-2002
DATE 05-08-2002
all.bookPage19Wednesday,August28,20029:36AM