Sending a Fax by Automatic Dialling
30
1 Press once and once.
2 Press once.
3 Press to select SET.
4 Enter a two-digit Speed Dial number by pressing the number keys (01 to
05 for Rapid Key Dialling, 06 to 40 for Speed Dialling).
5 Enter the fax or voice number by pressing the number keys. Up to 32
digits can be entered. (Note: A space cannot be entered.)
• To clear a mistake, press .
• If a pause is required between any of the digits to access a special service
or an outside line, press . The pause appears as a hyphen (two
seconds per pause). Several pauses can be entered in a row.
6 Press
FUNCTION
3
1
SPEED
DIAL
REDIAL
START
Display:
FAX/TEL # MODE
ENTRY MODE
0
1
(Example)
Storing fax and phone numbers for automatic dialling
all.bookPage30Friday,April5,200211:44AM
To Next Page
Loading...
Need help?
General
