UX-B20U/UX-B20C/B25C
2 – 22
SW-O1 No. 1 ~ No. 8 Reserved
Set to "0".
SW-O2 No. 1 ~ No. 8 Reserved
Set to "0".
SW-O3 No. 1 ~ No. 8 Reserved
Set to "0".
SW-O4 No. 1 ~ No. 8 Reserved
Set to "0".
SW-O5 No. 1 ~ No. 8 Reserved
Set to "0".
SW-O6 No. 1 ~ No. 8 Reserved
Set to "0".
SW-P1 No. 1 ~ No. 8 Reserved
Set to "0".
SW-P2 No. 1 Reserved
Set to "0".
SW-P2 No. 2, No. 3 Reserved
Set to "1".
SW-P2 No. 4 Reserved
Set to "0".
SW-P2 No. 5 ~ No. 8 Reserved
Set to "1".
SW-P3 No. 1 ~ No. 8 Reserved
Set to "0".
SW-P4 No. 1 ~ No. 8 Reserved
Set to "0".
SW-P5 No. 1 ~ No. 8 Reserved
Set to "0".
SW-P6 No. 1 Ink save mode
If set to “1”, printing is done with half of ink.
SW-P6 No. 2 Half tone copy ink save mode printing fixed
If set to “1”, copy of half tone resolution is printed with ink save mode
regardless of SW-P6 No. 1 setting. If set to “0”, copy of half tone reso-
lution is printed based on SW-P6 No. 1 setting.
SW-P6 No. 3 ~ No. 8 Reserved
Set to "0".
SW-P7 No. 1 ~ No. 3 Reserved
Set to "0".
SW-P7 No. 4, No. 5 End buzzer
The sounding length of the buzzer for normal end of operation set.
SW-P7 No. 6 Key error/ Communication error beep
When set to “1”, the machine will not sound the alert beep when the
communication error/printer error/key error are occurred.
SW-P7 No. 7 End buzzer (3sec)
When set to “1”, the machine will not sound the end-beep (3sec) when
the communication or copy etc. has finished normally.
SW-P7 No. 8 Key touch tone
When set to “1”, the machine will not sound the key touch tone (except
for key error tone).
To Next Page
Loading...
Need help?
General
