Sharp VL-Z100S - Setting the Date and Time

Preparation
13
4 Press m or l to select “2” (day),
then press the centre of the Operation
button.
5 Press m or l to select “6” (month),
then press the centre of the Operation
button.
6 Press m or l to select “2005” (year),
then press the centre of the Operation
button.
7 Press m or l to select “10” (hour),
then press the centre of the Operation
button.
8 Press m or l to select “30” (minute),
then press the centre of the Operation
button.
• The internal clock now starts
operating with the seconds display.
9 Press the MENU button to turn off the
menu screen.
Note:
• If the date and time have been set, the
SETTING 1 screen (T) appears in step 2.
Select “SETTING” in the OTHERS 2 screen
(~) using the Operation button.
Setting the Date and
Time
Example: Setting the date to 2 June 2005
(2. 6. 2005) and the time to 10:30 am
(10:30).
Note:
• Before performing the steps below, make
sure that the CR1216 type lithium battery has
been installed (see page 10).
• The example screens shown are for Camera
mode.
1 Hold down the Lock
button and set the
Power switch to v or
w.
2 Press the MENU button to display the
menu screen.
3 Press the centre of the Operation
button.
OTHERS 2
DATE D I SP.
RETURN
T IME CODE OFF
POWER SAVE OFF
OFFTC OUT
SETTING
12H
24H
24H/
DATE
+
TIME
000:
12004.1.
2.
000
:
1 2004.
SETT ING
SETT ING
2.
000
:
6 2004.
SETT ING
2.
0 00
:
6 2005.
SETT ING
2.
01 00
:
6 2005.
100030RETURN
::
6 2005.2.
SETT ING
(Continued on the next page)
MENU button
Power switch
Operation button
Lock button
VL-Z300S/VL-Z100S-GB-005-019 04.2.12, 1:54 PM13