Sharp VL-Z100S

Useful Features
37
Power Save Mode
Power save mode will turn off the
camcorder automatically to save battery
power when the camcorder is not in use for
5 or 10 minutes.
Note:
• To resume recording or playback, set the
Power switch to OFF, then back to v or w.
• The example screens shown are for Camera
mode.
1 Turn on the camcorder, then press
the MENU button to display the menu
screen.
2 Press l or m on the Operation
button to select ~, then press the
centre of the Operation button.
3 Press l or m to select “POWER
SAVE”, then press the centre of the
Operation button.
4 Press l or m to select “5 MIN” or “10
MIN”, then press the centre of the
Operation button.
5 Press the MENU button to turn off the
menu screen.
To cancel the power save mode
Select “OFF” in step 4 above.
Notes:
• The camcorder will not turn off when
recording or playing back. It will also not turn
off when inputting AV or DV for VL-Z300.
• The camcorder will turn off prior to Power
Standby mode.
OTHERS 2
TIME
PO
W ER SAVE
CODE
TC
5 MI N
10 MIN
OU T
OFF
DAT E D I SP.
RETURN
SETT I NG
12H 24H/
PO W ER SAVE 5 MI N
Windbreak
The windbreak function allows you to
reduce annoying noise from strong winds
when recording.
1 In Camera mode, press the MENU
button to display the menu screen.
2 Press l or m on the Operation
button to select Y, then press the
centre of the Operation button.
3 Press l or m to select “WIND”, then
press the centre of the Operation
button.
4 Press l or m to select “ON”, then
press the centre of the Operation
button.
5 Press the MENU button to turn off the
menu screen.
To cancel Windbreak
Select “OFF” in step 4 above.
Note:
• Keep the windbreak function off during
normal recording. If left on, the recorded
audio may sound somewhat muffled when
played back.
SETT ING 2
DIS
AUD I O MODE
RETURN
W IND
OFF
ON
ON
W IND
VL-Z300S/VL-Z100S-GB-033-041 04.2.12, 1:57 PM37