Sharp VL-Z100S User Manual

Basic Operations
24
Basic Operations
Camera Recording
Information Display
for Battery Usage
When the camcorder operates with the
battery pack, the battery usage indicator
appears beside the remaining battery
power indicator.
When both indicators appear, the
camcorder consumes power from both
battery packs.
When one indicator appears, it consumes
power from the indicated battery pack.
Remaining Battery
Power Display
When using the camcorder with the battery
pack as the power source, the remaining
battery power indicator is displayed. If the
battery power becomes very low, a warning
indicator appears. Replace the battery
pack.
Notes:
• The remaining battery power indicator
appears when the on-screen indicators are
turned on.
• Use the remaining battery power indicator
only as an approximate indication.
• The remaining battery power indicator may
change to either a higher or lower level if you
set the Power switch to OFF and then back to
v or w.
• In cold environments, the red remaining
battery power indicator may appear sooner.
• Use of the zoom functions when the warning
indicator is displayed may cause the
camcorder to suddenly lose power.
BATTERY IS
TOO LOW.
Remaining
battery power
indicator
Warning
indicator
(Green)
(Green)
(Red)
Battery usage indicator for
the battery pack attached
to the camcorder
Battery usage indicator for the
optional external battery with
hand strap BT-LCA1
VL-Z300S/VL-Z100S-GB-020-027 04.2.12, 1:55 PM24

Sharp VL-Z100S Specifications

General

Brand	Sharp
Model	VL-Z100S
Category	Camcorder
Language	English