Sharp VL-Z100S

Useful Features
Camera Recording
Useful Features
36
Digital Image
Stabilization (DIS)
The digital image stabilization (DIS) function al-
lows you to stabilize the image by electronically
compensating for relatively minor image shak-
ing that is often annoying in close-up shots.
1 In Camera mode, press the MENU
button to display the menu screen.
2 Press l or m on the Operation
button to select Y, then press the
centre of the Operation button.
3 Press l or m to select “DIS”, then
press the centre of the Operation
button.
4 Press l or m to select “ON”, then
press the centre of the Operation button.
5 Press the MENU button to turn off the
menu screen.
• The DIS indicator only appears when
the on-screen indicators are turned on.
To cancel DIS function
Select “OFF” in step 4 above. The z
indicator will disappear.
Notes:
• The DIS function cannot compensate for
excessive image shaking.
• When image shaking does not occur (e.g.
when using the camcorder on a tripod), turn
off the DIS function. The picture will appear
more natural when the DIS function is off.
SETT ING 2
DIS
ON
OFF
AUD I O MODE
RETURN
W IND
PAUSE
ONDIS
Wide Mode
The wide screen function lets you record
scenes with the wide-screen feel of a movie
shown in a theater. The top and bottom of
the picture are masked with black bands to
produce an effective screen aspect ratio of
16:9.
1 In Camera mode, press the MENU
button to display the menu screen.
2 Press l or m on the Operation
button to select T, then press the
centre of the Operation button.
3 Press l or m to select “WIDE
MODE”, then press the centre of the
Operation button.
4 Press l or m to select “ON”, then
press the centre of the Operation
button.
• The picture is displayed with the top
and bottom portions masked.
5 Press the MENU button to turn off the
menu screen.
To return to normal screen
Select “OFF” in step 4 above.
SETT ING 1
QK.
DGTL
RE TURN
ZOOM
TAPE SPEED
RETURN
OFF
ON
W I DE MODE
W IDE MODE
ON
Wide screen
DIS indicator
Normal screen
VL-Z300S/VL-Z100S-GB-033-041 04.2.12, 1:57 PM36