17
Percent Key
DD
DD
D
In both Example 1 and Example 2, you can omit entering the percent rate if it is preset
to the percent key and you want to use it.
Example 1: Applying a 20% discount to an item belonging to department 3.
800# 2000% L
Price and dept. Percent rate
Example 2: Applying a 20% discount to the subtotal of a transaction.
1000! 500@ S 2000% L
Price and dept. Price and dept. Percent rate
Minus Key
The - key is used to apply a discount on individual items or on a subtotal.
Programming a Preset Reduction Amount
The - key can be programmed for a preset price reduction amount. Set the mode switch to
the Z/PGM position and program the reduction amount as follows:
Reduction amount (max. 5 digits) ➝
-
(
➝
S)
Example: Program the minus key for a £1.00 reduction.
100 -(S)
Reduction amount
DD
DD
D
You can continue programming without printing the programming report by not press-
ing the S key at the end of the program.
Programming an Entry Digit Limit
Set the mode switch to the Z/PGM position and assign an entry digit limit as follows:
Entry digit limit (0 to 7) ➝ x ➝ - (➝ S)
To Next Page
Loading...
