28
Maintentance
Ink Roller
When printing becomes faded, replace the existing ink roller with a new one available from
SHARP.
Replacement
1. Open the printer cover.
2. Remove the ink roller by pulling it upward.
3. Install a new ink roller.
4. Close the printer cover.
In Case of Power Failure or Paper Jam
The following situations occur during a power failure or paper jam. (Batteries must be correctly
installed.) It disappears with the next key operation.
When a power failure occurs with the register turned on
or during a computation process:
When power returns, the register resumes operation from the point of failure.
When a power failure occurs during the printing of
a sales transaction:
When power returns, the register prints
“############” and resumes correct printing of
the transaction.
When a power failure occurs during the printing of
X (reading) or Z (reading and resetting) report:
When power returns, the register prints
“############” and resumes correct printing of
the report.
What to do when the printer motor locks:
If the printer motor locks, printing stalls and intermittent beeping starts. First, unplug the
power cord and repair the paper jam. Then plug in the power cord, feed the roll paper to
the proper position and press c. The register will then resume correct printing after
printing “############”.
To Next Page
Loading...
