Sharp XE-A130 - When an Error Occurs; Error Escape Function

9
Program Departments
Departments are used to classify merchandise and apply group attributes such as taxable
status, on items when they are entered.
Your register comes pre-programmed with all the departments as positive (+) and taxable 1. If
you wish to change a department’s status, program as desired following the procedure on page
13.
Program Other Items as Necessary
Your cash register is pre-programmed so that you can use it with minimum setup. To change
the settings, see the appropriate sections.
Departments: Taxable 1. Positive (+). Preset price: 0.00
% key: Negative (-). Preset rate: 0.00
- key: Preset amount: 0.00
Receipt number: Starting from 0001
Date format : ddmmyy
Time format: 24 hour format
Printing format: Printing manual VAT amount, journal format, printing date, time, receipt
number, and taxable subtotal, and not printing of subtotal with S
When an Error Occurs
When your register goes into an error state, it displays the error message “e” accompanied with
a warning beep. Clear the error state by pressing the c key and take an appropriate action.
1.When you enter an over 7-digit number to the department or an over 8-digit number
(79999999) to RA, PO, credit or cheque operation:
Press c and re-enter a correct number.
2.When you make an error in key operation:
Press c and operate keys correctly.
3.When you make an entry beyond a programmed entry digit limit:
Check if the entered amount is correct. If correct, check the setting of the entry digit limit.
4.When a subtotal exceeds eight digits (79999999):
Press c and then press L, G or g to finalize the transaction at that point.
5.When the number of an item exceeds 3 digits in multiplication entry:
Press c and re-enter a correct number.
Error Escape Function
When an error or something uncontrollable occurs during transaction entry and you cannot keep
the customer waiting, press V twice (following c when in the error state). You can escape the
situation and finalize the transaction at that time. Transaction entries until then are registered.
Before Operation