18
Example: Program the minus key for 7-digit limit.
7 x-(S)
Entry digit limit
DD
DD
D
You can continue programming without printing the programming report by not press-
ing the S key at the end of the program.
Discounts Using the Minus Key
If you want to apply a discount for an item, enter the reduction amount and press the minus key.
If you want to apply a discount for the subtotal, enter all the items, press S and then press
the minus key following the reduction amount.
DD
DD
D
In both Example 1 and Example 2, you can omit entering the reduction amount if it is
preset to the minus key and you want to use it.
Example 1: Applying a £1.00 discount to a £25.00 item belonging to department 3.
2500# 100- L
Price and dept. Reduction amount
Example 2: Applying a £1.00 discount to the subtotal of a transaction.
1200! 900@ S 100- L
Price and dept. Price and dept. Reduction amount
Non-add Code Number
Non-add code numbers can be entered and printed on the receipt or journal during the entry of
a sale. Non-add codes can be used for a variety of things. For example: credit numbers, check
numbers, serial numbers, product codes, service charge codes, or any other numbers for later
reference to specific transactions. Enter a code number of up to 8 digits and press S.
Example: Selling a £25.00 item (department 3) by charge account to a customer whose code
number is 123.
123S 2500# G
Code number Price and dept.
Minus Key
To Next Page
Loading...
