Sharp XL-BB20D

EN-6
EN
B503
■ Line In connection
Connect to the TV using an audio cable.
Main unit
To LINE input
sockets
Audio signal
Audio cable
(commercially
available)
To audio output
sockets
TV
To select Line In function:
● On main unit: Press INPUT button repeatedly until Line
In is displayed.
● On remote control: Press AUDIO/LINE (INPUT) button
repeatedly until Line In is displayed.
■ Aerial connection
Supplied FM/DAB aerial:
Connect to the FM/DAB 75 ohms socket and position it
where reception is best.
External FM/DAB aerial:
Use an external FM/DAB aerial (75 ohms coaxial cable)
for better reception. Disconnect the supplied FM/DAB
aerial wire before use.
Note:
Keep the aerial away from the unit or AC power lead to
avoid noise pickup.
■ Bluetooth standby mode
● The rst time the unit is plugged in, it will enter the
Bluetooth standby mode. Bluetooth standby indicator
lights up.
● To cancel the Bluetooth standby mode, press the ECO
button (remote control) during power standby mode.
The unit will enter the low power consumption mode.
● To return to the Bluetooth standby mode, press the ECO
button again.
■ AC power connection
After all connections have been made correctly, plug the
AC power lead into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
Make sure to unplug the AC power lead before making any connections.
System connections
FM/DAB aerial
Installing the supplied
FM/DAB aerial
Wall socket
(AC 100 - 240 V
~ 50/60 Hz)
To AC INPUT
socket
XL-BB20D_OM_EN_DE_ES_FR_IT_PL.indb 6 2018-01-25 10:09:50