Sharp XV-Z2000 - Part Names and Functions; Projector Controls Overview

12
XV-Z2000
DT-400
Projector (Rear View)
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
Remote control sensor
AC socket
Connect the supplied
Power cord.
Kensington Security
Standard connector
Rear adjustment feet
Intake vent
Exhaust vent
The speed and pitch of
the cooling fan may
change during operation
in response to internal
temperature changes.
This is normal operation
and does not indicate a
malfunction.
INPUT 2 terminal
Component signals.
Digital input type switch
INPUT 5/DIGITAL
terminal
INPUT 1 terminal
Component signals.
INPUT 4 terminal
Connect video
equipment.
INPUT 3 terminal
Connect video
equipment with an
S-video terminal.
RS-232C terminal
Control the projector using a
computer.
Terminals