106 Settings
• The approximate time of file transfer is one minute per 100 Kbyte file.
Receiving data in Automatic receive mode
The Automatic receive mode notifies you of the data, even if you are in another
application.
1.
Tap the Automatic radio button on the Beam Receive screen.
2.
Perform step 3 to 5 above of “Receiving data in Manual mode” to start data
transfer.
Note:
If the unit receives the data, which has the same category but belong to
the different application, from the sending unit, the category of the
received data will be changed to “Unfiled”.
Setting the Appearance
Appearance setting allows you to customize the desktop and window properties.
1.
In the Settings folder of the Home screen, tap the “Appearance” application
icon.
A list of styles and a list of color schemes appear.
2.
Tap any of the three styles for the graphical display from the upper list.
3.
Tap any of the seven-color schemes for the display from the lower list.
4.
Tap to save the settings.
The settings will be immediately effective.
The shape and design color of the button, scroll bar, drop-down list button, etc.
will be changed.
To cancel setting, tap .
12.Settings.fm Page 106 Monday, January 21, 2002 9:21 PM
To Next Page
Loading...
Need help?
General
