102 Settings
7.
Tap "Yes" to start restore process.
When the restore process has been completed, the unit will automatically restarted
and the display returns to the Home screen.
Beam Receive
You can transfer a single entry created in the Address Book, Calendar, or Todo List
applications or a document file using the IR port (IrDA) on the left side of the unit.
This section describes how to transfer data between the same models. The SL-5500
can transfer data with other models.
Note:
Beaming items to models other than SL-5500 may cause loss of some
items or character strings.
Setting
When you transfer data by infrared beam, be sure to turn the IR port to face that of
the other unit and to use both units within 8 inches (approximately 20 cm of each
other).
Beam Receive screen
The Beam Receive screen allows you to set up preferences for IR communication.
1.
In the Settings folder of the Home screen, tap the “Beam Receive” application
icon.
Not more than 8 inches
(approximately 20 cm)
00.Cover.book Page 102 Monday, January 21, 2002 5:47 PM
To Next Page
Loading...
Need help?
General
